FWC721-100-B5-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101882853

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Bolt Centers w/ Std. Base Kit (in)	6 3/8 x 4 11/16
Bore Code	B5
Torque Out @ 1750 rpm	910 in lb
Output RPM @ 1750 rpm Input	17.5 rpm
Reduction Type	Double Reduction
Max. Thrust Load @ 1150 rpm	700 lb/in
Torque Out @ 1150 rpm	N/A
Max. Overhung Load @ 1750 rpm	700 lb/in
HP @ RPM	0.5 hp @ 1800 rpm
Bolt Centers w/ Vertical "J" Base Kit (in)	8.63 x 2.63
Bolt Center	5 in x 2 7/8 in
Worm Position	Universal¦Right Angle
Lubrication	None
Frame Size	56C
Keyway Size	3/16 x 3/32
Washdown Duty	No
Output (Shaft or Bore) Size	1 in
Fan Cooled	No
Box Width	9 55/64 in
Motor Application	General Purpose
Output Configuration	Left Output
Base to Centerline of Input Shaft	N/A
Family Name	FWC
Box Height	6 25/64 in
Base to Shaft Center Height w/Std. Base Kit	4.81 in
Housing Material	Cast Iron
Base to Shaft Center Height w/Vert. "J" Base Kit	3.94 in
Base to Shaft Center Height w/Low Vert. Base Kit	3.13 in
Base to Centerline of Output Shaft	2 9/32 in
Input (Shaft or Bore) Size	5/8 in
Input Configuration	C-Face Quilled
Thermal Input Horsepower @ 1750 RPM	N/A
Bolt Centers w/ Vertical Base Kits (in)	8 3/8 x 4 7/8
Ratio	100:1
Motor HP	0.5 hp
Center Distance	2.0625 in
Box Length	5 13/64 in
Base to Shaft Center Height w/High Vert. Base Kit	4.88 in
Frame	56C
Shaft Assembly Code	G
Weight	35.1 LB
EAN or UPC	781711524428