RFWA738-400E-B5-G

700 Series C-Face Coupled Double Reduction Parallel Reducer

Item #101871343

Universal, Parallel Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Bolt Centers w/ Vertical Base Kits (in)	13.94 x 8.00
Output (Shaft or Bore) Size	1 5/8 in
Ratio	400:1
Bore Code	B5
Base to Centerline of Input Shaft	4 7/8 in
Shaft Assembly Code	G
Torque Out @ 1750 rpm	5700 in lb
Max. Overhung Load @ 1750 rpm	2000 lb/in
Thermal Input Horsepower @ 1750 RPM	N/A
Bolt Centers w/ Std. Base Kit (in)	10 3/8 x 7
Base to Shaft Center Height w/High Vert. Base Kit	7 in
Output Configuration	Left Output
Output RPM @ 1750 rpm Input	4.38 rpm
Frame	56C
Base to Centerline of Output Shaft	6 9/16 in
Box Width	14 35/64 in
Reduction Type	Double Reduction
Max. Thrust Load @ 1150 rpm	1300 lb/in
Worm Position	Universal¦Parallel
Center Distance	3 3/4 in
Bolt Center	8 1/2 in x 4 3/4 in
Input (Shaft or Bore) Size	5/8 in
Box Height	10 7/16 in
Base to Shaft Center Height w/Std. Base Kit	7 1/2 in
Family Name	RFWA
Base to Shaft Center Height w/Low Vert. Base Kit	5 1/4 in
Motor Application	General Purpose
Input Configuration	C-Face Coupled
Keyway Size	3/16 x 3/32
Frame Size	56C
HP @ RPM	0.75 hp @ 1800 rpm
Housing Material	Cast Iron
Torque Out @ 1150 rpm	N/A
Washdown Duty	No
Lubrication	None
Box Length	8 1/2 in
Motor HP	3/4 hp
Fan Cooled	No
Weight	115.1 LB
EAN or UPC	781711530627