VR137-N-M5

VR Series Spiral Bevel Gear Reducer

Item #102214262

Auto Replenish

each One-time purchase

Product Details

Housings are made of cast iron, precision-machined to ensure accurate, permanent alignment of the gears
Gears are made of hardened alloy steel
Shafts are heat-treated alloy steel mounted on heavy-duty, tapered roller bearings
Shaft projections have quality oil seals
Assembly can be mounted in any position with input shaft horizontal by relocating oil plugs in proper position

Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Relative Shaft Rotation	Up - Clockwise, Down - Counter Clockwise
Input Configuration	Shaft Input
Unit Size	137
Output Configuration	Double
Bearing Type	Roller Bearing
Assembly	N
Output RPM @ 1750 rpm Input	1750 rpm
Gear Style	Spiral Bevel
Washdown Duty	No
Output Relation to Base	Vertical
Box Length	8.47 in
Input Relation to Base	Horizontal
Bolt Hole Pattern	4.88 in x 4.88 in
Input Shaft Position	Facing You
Shaft Arrangement	#19
Ratio	1:1
Torque Out @ 1750 rpm	318 in lb
Max. Overhung Load @ 1750 rpm	317 lb/in
Torque Out @ 1150 rpm	318 in lb
Box Height	5.9 in
Box Width	5.72 in
Input (Shaft or Bore) Size	3/4 in
Output Shaft Position	Up & Down
Output (Shaft or Bore) Size	3/4 in
Weight	27.1 LB
EAN or UPC	781711422304