Find a Service Center
Alternate Products
- Finished Steel Gear
- 10 Diametral Pitch
- 20.0° Pressure Angle
- 16 Teeth
- 1.600" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| No. of Teeth | 16 |
| Pitch Diameter | 1.6 in |
| Length Through Bore | 1.87 in |
| Origin | Finished Bore |
| Hub Dia. | 1.31 in |
| Set Screw | Yes |
| Hardened Teeth | Without Hardened Teeth |
| Bore Type | Finished |
| Bore Size | 0.75 in |
| Torque at 1200 RPM | 321 lb/in |
| Material | Steel |
| Torque at 1800 RPM | 262 lb/in |
| Torque at 600 RPM | 416 lb/in |
| Torque at 900 RPM | 363 lb/in |
| Set Screw Size | 3/4 |
| Torque at 300 RPM | 488 lb/in |
| Torque at 200 RPM | 518 lb/in |
| Pressure Angle | 20 ° |
| Keyway | w/Setscrew |
| Outside Dia. | 1.8 in |
| Diametral Pitch | 10 |
| Weight | 0.601 LB |
| EAN or UPC | 781711461761 |
