Find a Service Center
Alternate Products
- Finished Steel Gear
- 10 Diametral Pitch
- 20.0° Pressure Angle
- 25 Teeth
- 2 1/2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Torque at 1200 RPM | 459 lb/in |
| Pressure Angle | 20 ° |
| Origin | Finished Bore |
| Hub Dia. | 2.11 in |
| Keyway | w/Setscrew |
| Torque at 900 RPM | 535 lb/in |
| Outside Dia. | 2.7 in |
| Hardened Teeth | Without Hardened Teeth |
| Diametral Pitch | 10 |
| Bore Type | Finished |
| Length Through Bore | 1.87 in |
| Set Screw | Yes |
| Bore Size | 0.875 in |
| Torque at 1800 RPM | 358 lb/in |
| Torque at 200 RPM | 870 lb/in |
| Pitch Diameter | 2.5 in |
| No. of Teeth | 25 |
| Set Screw Size | 7/8 |
| Torque at 600 RPM | 641 lb/in |
| Torque at 300 RPM | 799 lb/in |
| Material | Steel |
| Weight | 2.001 LB |
| EAN or UPC | 781711461839 |
