Skip to content Skip to navigation menu
700 Series Standard Reducer

718-40-G

700 Series Standard Reducer
Item #101806686
  • 1 3/4" Center Distance
  • 40:1 Ratio
  • Shaft Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series Standard Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1 3/4" Center Distance
  • 40:1 Ratio
  • Shaft Input
  • Left Output
  • Universal Worm Position

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • The Guardian™ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
Base to Centerline of Input Shaft 3 13/16 in
Max. Overhung Load @ RPM 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm
Input (Shaft or Bore) Size 5/8 in
Reduction Type Single Reduction
Family Name Std Unit
Housing Material Cast Iron
Washdown Duty No
Torque Out @ 1750 rpm 609 in lb
Center Distance 1 3/4 in
Fan Cooled No
Box Length 5 1/2 in
Box Width 3 11/16 in
Output (Shaft or Bore) Size 7/8 in
Worm Position Universal
Bolt Center Length x Bolt Center Width 5 3/4 in x 4 1/2 in
Output RPM @ Input RPM 44 rpm @ 1750 rpm
Base to Shaft Center Height w/High Vert. Base Kit 4.38 in
Base to Shaft Center Height w/Vert. "J" Base Kit 3.5 in
Output Torque @ RPM 525 in lb @ 1150 rpm, 609 in lb @ 1750 rpm
Max. Overhung Load @ 1750 rpm 500 lb/in
Base to Shaft Center Height w/Low Vert. Base Kit 3 in
Frame Size Shaft Input, Not a C-Face
Use With 718
Shaft Assembly Code G
Bolt Centers w/ Vertical Base Kits (in) 7.38 x 4.00
Bolt Centers w/ Std. Base Kit (in) 5 3/4 x 4 1/2
Base to Shaft Center Height w/Std. Base Kit 4.38 in
Input Configuration Shaft Input
Lubrication None
Max. Input HP @ 100 rpm 0.052 hp
HP @ RPM 0.3333333 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm
Frame N/A
Output RPM @ 1750 rpm Input 43.75 rpm
Bolt Centers w/ Vertical "J" Base Kit (in) 7.63 x 2.50
Bolt Center 5 3/4 in x 4 1/2 in
Torque Out @ 1150 rpm 525 in lb
Max. Thrust Load @ RPM 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm
Thermal Input Horsepower @ 1750 RPM N/A
Max. Thrust Load @ 1150 rpm 500 lb/in
Motor Application General Purpose
Ratio 40:1
Output Configuration Left Output
Base to Centerline of Output Shaft 2 1/16 in
Input HP @ RPM 0.33 hp @ 1150 rpm, 0.57 hp @ 1750 rpm
Box Height 5 3/4 in
Weight 19.1 LB
EAN or UPC 781711516720
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison