Find a Service Center
- 3" Center Distance
- 20:1 Ratio
- Shaft Input
- Left Output
- No Lubricant
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Box Width | 6 49/64 in |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Motor Application | General Purpose |
| Ratio | 20:1 |
| Input Configuration | Shaft Input |
| Reduction Type | Single Reduction |
| Output Configuration | Left Output |
| Use With | 730 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| HP @ RPM | 3 hp @ 1800 rpm |
| Torque Out @ 1150 rpm | 2470 in lb |
| Box Length | 8 45/64 in |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Output Torque @ RPM | 2024 in lb @ 1750 rpm, 2470 in lb @ 1150 rpm |
| Bolt Center | 7 in x 4 in |
| Lubrication | None |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Input HP @ RPM | 2.68 hp @ 1150 rpm, 3.14 hp @ 1750 rpm |
| Torque Out @ 1750 rpm | 2024 in lb |
| Fan Cooled | No |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Center Distance | 3 in |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Family Name | Std Unit |
| Housing Material | Cast Iron |
| Box Height | 8 7/8 in |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Frame | N/A |
| Worm Position | Universal |
| Frame Size | Shaft Input, Not a C-Face |
| Washdown Duty | No |
| Input (Shaft or Bore) Size | 7/8 in |
| Weight | 55.1 LB |
| EAN or UPC | 781711648322 |
