Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life
caution
Ideal for use with filters and lubricators
Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
Max. Overhung Load @ 1750 rpm
700 lb/in
Bolt Center
5 in x 2 7/8 in
Motor HP
0.17 hp
Frame Size
56C
HP @ RPM
0.08333333 hp @ 1800 rpm
Center Distance
2.0625 in
Frame
56C
Torque Out @ 1750 rpm
900 in lb
Base to Centerline of Input Shaft
3 3/8 in
Washdown Duty
No
Torque Out @ 1150 rpm
N/A
Max. Thrust Load @ 1150 rpm
700 lb/in
Motor Application
General Purpose
Base to Shaft Center Height w/Low Vert. Base Kit
3.13 in
Worm Position
Universal¦Parallel
Base to Shaft Center Height w/High Vert. Base Kit
4.88 in
Bore Code
B5
Bolt Centers w/ Vertical Base Kits (in)
8 3/8 x 4 7/8
Box Length
5 13/64 in
Base to Shaft Center Height w/Std. Base Kit
4.81 in
Family Name
FWA
Shaft Assembly Code
G
Base to Centerline of Output Shaft
4 3/32 in
Thermal Input Horsepower @ 1750 RPM
N/A
Box Width
9 55/64 in
Keyway Size
3/16 x 3/32
Ratio
1800:1
Output RPM @ 1750 rpm Input
0.97 rpm
Input Configuration
C-Face Quilled
Reduction Type
Double Reduction
Housing Material
Cast Iron
Output Configuration
Left Output
Bolt Centers w/ Std. Base Kit (in)
6 3/8 x 4 11/16
Base to Shaft Center Height w/Vert. "J" Base Kit
3.94 in
Input (Shaft or Bore) Size
5/8 in
Box Height
6 25/64 in
Lubrication
None
Output (Shaft or Bore) Size
1 in
Bolt Centers w/ Vertical "J" Base Kit (in)
8.63 x 2.63
Fan Cooled
No
Weight
35.1 LB
EAN or UPC
884107007434
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
