FWC718-1200-B4-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101871253

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Thermal Input Horsepower @ 1750 RPM	N/A
Shaft Assembly Code	G
Max. Thrust Load @ 1150 rpm	500 lb/in
Bolt Centers w/ Vertical Base Kits (in)	7.38 x 4.00
Box Height	5 3/4 in
Torque Out @ 1150 rpm	N/A
Motor Application	General Purpose
Input Configuration	C-Face Quilled
Output (Shaft or Bore) Size	7/8 in
Worm Position	Universal¦Right Angle
Housing Material	Cast Iron
Bore Code	B4
Bolt Center	4 3/16 in x 2 3/4 in
Bolt Centers w/ Std. Base Kit (in)	5 3/4 x 4 1/2
Base to Centerline of Input Shaft	N/A
Base to Shaft Center Height w/Low Vert. Base Kit	3 in
Washdown Duty	No
Motor HP	0.17 hp
Torque Out @ 1750 rpm	690 in lb
Output Configuration	Left Output
Output RPM @ 1750 rpm Input	1.46 rpm
Base to Shaft Center Height w/High Vert. Base Kit	4.38 in
Ratio	1200:1
Frame	42CZ
Box Width	8 7/8 in
Input (Shaft or Bore) Size	1/2 in
Bolt Centers w/ Vertical "J" Base Kit (in)	7.63 x 2.50
Base to Centerline of Output Shaft	2 1/16 in
Family Name	FWC
Lubrication	None
Fan Cooled	No
Center Distance	1 3/4 in
HP @ RPM	0.08333333 hp @ 1800 rpm
Keyway Size	1/8 x 1/16
Base to Shaft Center Height w/Vert. "J" Base Kit	3.5 in
Base to Shaft Center Height w/Std. Base Kit	4.38 in
Max. Overhung Load @ 1750 rpm	500 lb/in
Reduction Type	Double Reduction
Box Length	5 1/16 in
Frame Size	42CZ
Weight	26.1 LB
EAN or UPC	781711524411