FWC718-150-B4-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101350435

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Lubrication of Acme Nut assemblies determines the ultimate life of the assembly. Improper maintenance and dirty environment will lead to premature failure.

Specifications

Lubrication	None
Bolt Centers w/ Vertical "J" Base Kit (in)	7.63 x 2.50
Max. Thrust Load @ 1150 rpm	500 lb/in
Output RPM @ 1750 rpm Input	11.67 rpm
Base to Shaft Center Height w/High Vert. Base Kit	4.38 in
Box Width	8 7/8 in
Bolt Center	4 3/16 in x 2 3/4 in
Base to Shaft Center Height w/Vert. "J" Base Kit	3.5 in
Base to Centerline of Output Shaft	2 1/16 in
HP @ RPM	0.25 hp @ 1800 rpm
Torque Out @ 1150 rpm	N/A
Frame Size	42CZ
Motor Application	General Purpose
Output Configuration	Left Output
Washdown Duty	No
Ratio	150:1
Box Height	5 3/4 in
Base to Centerline of Input Shaft	N/A
Box Length	5 1/16 in
Fan Cooled	No
Torque Out @ 1750 rpm	580 in lb
Center Distance	1 3/4 in
Bolt Centers w/ Std. Base Kit (in)	5 3/4 x 4 1/2
Motor HP	1/4 hp
Frame	42CZ
Housing Material	Cast Iron
Shaft Assembly Code	G
Base to Shaft Center Height w/Low Vert. Base Kit	3 in
Bolt Centers w/ Vertical Base Kits (in)	7.38 x 4.00
Input (Shaft or Bore) Size	1/2 in
Max. Overhung Load @ 1750 rpm	500 lb/in
Thermal Input Horsepower @ 1750 RPM	N/A
Worm Position	Universal¦Right Angle
Base to Shaft Center Height w/Std. Base Kit	4.38 in
Family Name	FWC
Bore Code	B4
Keyway Size	1/8 x 1/16
Input Configuration	C-Face Quilled
Reduction Type	Double Reduction
Output (Shaft or Bore) Size	7/8 in
Weight	26.1 LB
EAN or UPC	781711524329