Find a Service Center
- Size 1216
- 1.5:1 Ratio
- Double, Left - Counter Clockwise/Rear - Clockwise, Left & Rear Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Unit Size | 1216 |
| Torque Out @ 1150 rpm | 785 in lb |
| Box Width | 7 in |
| Output Configuration | Double |
| Output Shaft Position | Left & Rear |
| Bearing Type | Roller Bearing |
| Output Relation to Base | No Base |
| Input Configuration | Shaft Input |
| Input (Shaft or Bore) Size | 1 in |
| Output (Shaft or Bore) Size | 1 in |
| Box Length | 9 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Box Height | 4 1/8 in |
| Input Shaft Position | Facing You |
| Bolt Hole Pattern | 4.25 in x 4.25 in |
| Relative Shaft Rotation | Left - Counter Clockwise, Rear - Clockwise |
| Gear Style | Bevel |
| Shaft Arrangement | #34 |
| Output RPM @ 1750 rpm Input | 1167 rpm |
| Assembly | L |
| Ratio | 1.5:1 |
| Torque Out @ 1750 rpm | 712 in lb |
| Washdown Duty | No |
| Input Relation to Base | No Base |
| Weight | 24.002 LB |
| EAN or UPC | 781711611173 |
