Find a Service Center
- 5 5/32" Center Distance
- 15:1 Ratio
- 210TC or 250UC Frame
- w/Fan
- C-Face Coupled Input
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Base to Centerline of Input Shaft | 10 1/2 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 6.38 in |
| Max. Thrust Load @ 1150 rpm | 1900 lb/in |
| Max. Overhung Load @ RPM | 2200 lb/in @ 1150 rpm, 2200 lb/in @ 1750 rpm |
| Lubrication | None |
| Frame | 210TC, 250UC |
| Output Torque @ RPM | 7700 in lb @ 1150 rpm, 7839 in lb @ 1750 rpm |
| Center Distance | 5 5/32 in |
| Bolt Center Length x Bolt Center Width | 11 in x 5 13/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 6.44 in |
| Input Configuration | C-Face Coupled |
| Max. Input HP @ 100 rpm | 1.56 hp |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Torque Out @ 1150 rpm | 7700 in lb |
| Max. Thrust Load @ RPM | 1900 lb/in @ 1150 rpm, 1900 lb/in @ 1750 rpm |
| HP @ RPM | 10 hp @ 1800 rpm |
| Frame Size | 210TC, 250UC |
| Box Length | 13 1/8 in |
| Housing Material | Cast Iron |
| Keyway Size | 5/16 x 5/32 |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Input (Shaft or Bore) Size | 1 3/8 in |
| Installed Options | Fan |
| Torque Out @ 1750 rpm | 7839 in lb |
| Base to Centerline of Output Shaft | 5 5/16 in |
| Box Width | 9 21/32 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 8.63 in |
| Ratio | 15:1 |
| Reduction Type | Single Reduction |
| Output (Shaft or Bore) Size | 2 in |
| Fan Cooled | Yes |
| Output Configuration | Right Output |
| Input HP @ RPM | 10.5 hp @ 1150 rpm, 16.32 hp @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 14 1/8 x 8 3/8 |
| Family Name | RF |
| Max. Overhung Load @ 1750 rpm | 2200 lb/in |
| Bolt Center | 11" x 5 13/16" |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Motor Application | General Purpose |
| Shaft Assembly Code | J |
| Washdown Duty | No |
| Motor HP | 10 hp |
| Bore Code | B11 |
| Worm Position | Universal |
| Box Height | 13 3/4 in |
| Bolt Centers w/ Vertical Base Kits (in) | 18.00 x 10.00 |
| Weight | 216.1 LB |
| EAN or UPC | 781711467817 |
