RFWC726-900-B5-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101871429

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Lubrication	None
Family Name	RFWC
Base to Shaft Center Height w/High Vert. Base Kit	5.59 in
Max. Overhung Load @ 1750 rpm	1000 lb/in
Motor Application	General Purpose
Worm Position	Universal¦Right Angle
Bolt Centers w/ Vertical "J" Base Kit (in)	10.38 x 3.13
Bolt Center	6 3/8 in x 3 3/8 in
Ratio	900:1
Fan Cooled	No
Box Length	11 21/32 in
Box Width	6 in
Base to Shaft Center Height w/Low Vert. Base Kit	3.63 in
Output RPM @ 1750 rpm Input	1.94 rpm
Thermal Input Horsepower @ 1750 RPM	N/A
Washdown Duty	No
Input (Shaft or Bore) Size	5/8 in
Base to Shaft Center Height w/Vert. "J" Base Kit	4.75 in
Reduction Type	Double Reduction
Base to Centerline of Input Shaft	N/A
Center Distance	2 5/8 in
Keyway Size	3/16 x 3/32
Output (Shaft or Bore) Size	1 1/8 in
Frame	56C
Base to Shaft Center Height w/Std. Base Kit	5.81 in
Motor HP	0.17 hp
Frame Size	56C
Bore Code	B5
Base to Centerline of Output Shaft	2 15/16 in
Bolt Centers w/ Std. Base Kit (in)	8 x 5 1/4
Output Configuration	Left Output
Torque Out @ 1150 rpm	N/A
Torque Out @ 1750 rpm	2000 in lb
Housing Material	Cast Iron
Box Height	8 in
Bolt Centers w/ Vertical Base Kits (in)	10.13 x 5.75
Shaft Assembly Code	G
HP @ RPM	0.25 hp @ 1800 rpm
Input Configuration	C-Face Coupled
Max. Thrust Load @ 1150 rpm	900 lb/in
Weight	63.1 LB
EAN or UPC	781711531167