Find a Service Center
- 2 1/16" Center Distance
- 1200:1 Ratio
- Shaft Input
- Left Output
- Universal, Parallel Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Base to Centerline of Output Shaft | 4 3/32 in |
| Input Configuration | Shaft Input |
| Max. Overhung Load @ 1750 rpm | 700 lb/in |
| Shaft Assembly Code | G |
| Family Name | WA |
| Input (Shaft or Bore) Size | 1/2 in |
| Bolt Centers w/ Vertical Base Kits (in) | 8 3/8 x 4 7/8 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Frame Size | Shaft Input, Not a C-Face |
| Output (Shaft or Bore) Size | 1 in |
| Torque Out @ 1150 rpm | N/A |
| Box Height | 6 25/64 in |
| Output RPM @ 1750 rpm Input | 1.46 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.88 in |
| HP @ RPM | 0.125 hp @ 1800 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.13 in |
| Frame | N/A |
| Reduction Type | Double Reduction |
| Washdown Duty | No |
| Base to Centerline of Input Shaft | 3 3/8 in |
| Ratio | 1200:1 |
| Housing Material | Cast Iron |
| Worm Position | Universal¦Parallel |
| Bolt Center | 5 in x 2 7/8 in |
| Box Width | 9 55/64 in |
| Output Configuration | Left Output |
| Base to Shaft Center Height w/Std. Base Kit | 4.81 in |
| Bolt Centers w/ Std. Base Kit (in) | 6 3/8 x 4 11/16 |
| Lubrication | None |
| Box Length | 5 13/64 in |
| Torque Out @ 1750 rpm | 1025 in lb |
| Center Distance | 2 1/16 in |
| Max. Thrust Load @ 1150 rpm | 700 lb/in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.94 in |
| Fan Cooled | No |
| Motor Application | General Purpose |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 8.63 x 2.63 |
| Weight | 35.1 LB |
| EAN or UPC | 781711522486 |
