Find a Service Center
- 3 3/4" Center Distance
- 1200:1 Ratio
- Shaft Input
- Left Output
- Universal, Parallel Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Output Configuration | Left Output |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/Std. Base Kit | 7 1/2 in |
| HP @ RPM | 0.3333333 hp @ 1800 rpm |
| Max. Overhung Load @ 1750 rpm | 2000 lb/in |
| Bolt Centers w/ Vertical Base Kits (in) | 13.94 x 8.00 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Fan Cooled | No |
| Max. Thrust Load @ 1150 rpm | 1300 lb/in |
| Center Distance | 3 3/4 in |
| Output RPM @ 1750 rpm Input | 1.46 rpm |
| Ratio | 1200:1 |
| Frame Size | Shaft Input, Not a C-Face |
| Output (Shaft or Bore) Size | 1 5/8 in |
| Input Configuration | Shaft Input |
| Bolt Center | 8 1/2 in x 4 3/4 in |
| Box Width | 14 35/64 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Worm Position | Universal¦Parallel |
| Base to Centerline of Output Shaft | 6 9/16 in |
| Bolt Centers w/ Std. Base Kit (in) | 10 3/8 x 7 |
| Lubrication | None |
| Housing Material | Cast Iron |
| Torque Out @ 1150 rpm | N/A |
| Frame | N/A |
| Reduction Type | Double Reduction |
| Washdown Duty | No |
| Base to Shaft Center Height w/Low Vert. Base Kit | 5 1/4 in |
| Box Length | 8 1/2 in |
| Motor Application | General Purpose |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Family Name | WA |
| Box Height | 10 7/16 in |
| Torque Out @ 1750 rpm | 5700 in lb |
| Base to Shaft Center Height w/High Vert. Base Kit | 7 in |
| Weight | 100.1 LB |
| EAN or UPC | 781711523292 |
