Find a Service Center
- 6" Center Distance
- 300:1 Ratio
- Shaft Input
- Left Output
- Universal, Parallel Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Base to Centerline of Output Shaft | 10 in |
| Bolt Center | 12 3/4" x 6 3/8" |
| Ratio | 300:1 |
| Box Length | 10 7/8 in |
| Max. Thrust Load @ 1150 rpm | 2100 lb/in |
| Input Configuration | Shaft Input |
| Base to Shaft Center Height w/High Vert. Base Kit | 9.63 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Shaft Assembly Code | G |
| Family Name | WA |
| Bolt Centers w/ Std. Base Kit (in) | 16 1/2 x 9 1/2 |
| Center Distance | 6 in |
| Housing Material | Cast Iron |
| Torque Out @ 1750 rpm | 18500 in lb |
| Motor Application | General Purpose |
| Reduction Type | Double Reduction |
| Worm Position | Universal¦Parallel |
| Frame | N/A |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output RPM @ 1750 rpm Input | 5.8 rpm |
| Frame Size | Shaft Input, Not a C-Face |
| HP @ RPM | 3 hp @ 1800 rpm |
| Box Height | 16 1/2 in |
| Max. Overhung Load @ 1750 rpm | 2400 lb/in |
| Fan Cooled | No |
| Output (Shaft or Bore) Size | 2 1/4 in |
| Base to Centerline of Input Shaft | 7 1/4 in |
| Bolt Centers w/ Vertical Base Kits (in) | 20.88 x 11.75 |
| Torque Out @ 1150 rpm | N/A |
| Output Configuration | Left Output |
| Base to Shaft Center Height w/Std. Base Kit | 7 3/4 in |
| Washdown Duty | No |
| Lubrication | None |
| Box Width | 19 1/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 7.31 in |
| Weight | 315.1 LB |
| EAN or UPC | 781711523711 |
