Find a Service Center
- 1" Metallic Diaphragm Pump
- 1" NPT Inlet, 1" NPT Outlet
- 35 gal/min Max Flow
- Wetted Parts: Cast Iron
- Ball: Polyurethane
description
- Unbalanced Air Valve Eliminates Stalling.Start it up, shut it down – no matter how often or how long, the ARO Diaphragm Pump will start pumping every time. No Lubrication Required.One less maintenance detail to log. No oil droplets to contaminate your process or work site. And the ARO Diaphragm is more forgiving in dirty air service. Positive Priming Provides Easy Start-Ups.Internal pump fluid check valves are located close to diaphragm chambers, ensuring positive self-priming – even from a dry start. No Complex Controls.Unlike electric pumps, ARO Diaphragm Pumps contain no wires, circuits, fuses or by-pass controls to burn out and replace.
features
- Five-year manufacturer warranty
- Excellent for nonaggressive, general-purpose fluids
- Leak-free bolted construction
- Stall-free air valve operation
| Height | 12 1/2 in |
| Fluid Outlet | 1 in NPT |
| Fluid Inlet | 1 in NPT |
| Ratio | 1:1 |
| Length | 8 9/16 in |
| Diaphragm Material | TPE |
| Air Motor Material | Cast Iron |
| Seat Material | 440 Stainless Steel |
| Inlet/Outlet Type | Single Inlet, Single Outlet |
| Flow [Max] | 35 gal/min |
| Body Material | Cast Iron |
| Air Inlet Type | NPT |
| Pump Type | 1 in Metallic |
| Air Inlet | 1/4 |
| Manifold Material | Cast Iron |
| Width | 8 in |
| Hardware Material | Steel |
| Ball/Check Material | Polyurethane |
| Displacement (gal/cycle) | 0.16 |
| Maximum Pumpable Solids Size | 1/8 in |
| Inlet Pressure [Max] | 120 psi |
| Manifold Type | Single-Port Manifold |
| Wetted Material | Cast Iron |
| Air Motor Type | Standard |
| Weight | 39.99 LB |
