Find a Service Center
- 1" Metallic Diaphragm Pump
- 1" BSP Inlet, 1" BSP Outlet
- 35 gal/min Max Flow
- Wetted Parts: Cast Iron
- Ball: Nitrile
description
- Unbalanced Air Valve Eliminates Stalling.Start it up, shut it down – no matter how often or how long, the ARO Diaphragm Pump will start pumping every time. No Lubrication Required.One less maintenance detail to log. No oil droplets to contaminate your process or work site. And the ARO Diaphragm is more forgiving in dirty air service. Positive Priming Provides Easy Start-Ups.Internal pump fluid check valves are located close to diaphragm chambers, ensuring positive self-priming – even from a dry start. No Complex Controls.Unlike electric pumps, ARO Diaphragm Pumps contain no wires, circuits, fuses or by-pass controls to burn out and replace.
features
- Stall-free air valve operation
- Leak-free bolted construction
- Excellent for nonaggressive, general-purpose fluids
- Five-year manufacturer warranty
| Air Inlet | 1/4 |
| Manifold Material | Cast Iron |
| Length | 8 9/16 in |
| Body Material | Aluminum |
| Wetted Material | Cast Iron |
| Operation Temperature [Max] | 150 °F |
| Inlet/Outlet Type | Single Inlet, Single Outlet |
| Hardware Material | Stainless Steel |
| Displacement (gal/cycle) | 0.16 |
| Seat Material | Polypropylene |
| Maximum Pumpable Solids Size | 1/8 in |
| Air Motor Material | Aluminum |
| Manifold Type | Single-Port Manifold |
| Width | 8 in |
| Flow [Max] | 35 gal/min |
| Fluid Inlet | 1 in BSP |
| Air Inlet Type | NPT |
| Pump Type | 1 in Metallic |
| Inlet Pressure [Max] | 120 psi |
| Fluid Outlet | 1 in BSP |
| Air Motor Type | Standard |
| Operation Temperature [Min] | 35 °F |
| Height | 12 1/2 in |
| Ball/Check Material | Nitrile |
| Ratio | 1:1 |
| Diaphragm Material | Nitrile |
| Weight | 35.27 LB |
