Find a Service Center
- H Series
- 4-Bolt Flange
- 1 in Straight Shaft w/Woodruff Key
- 1/2 NPTF Side Port
- Nitrile Seals
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Port Size | 1/2 |
| Port Location | Side Port |
| Duty | Standard-Duty |
| Mount Type | 4 Bolt, 1.75 in Pilot |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 0 |
| Case Drain | None |
| Shaft Type | Straight w/ Woodruff Key |
| Flange Orientation | Standard |
| Port Type | NPTF |
| Mounting Type Code | B |
| Shaft Size & Type | 1 in Straight w/Woodruff Key |
| Displacement (in³/rev) | 14.1 |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Port Code | B |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features | None |
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Mounting Holes | 3/8-16 |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Paint Code | A |
| Pilot Diameter | 1.75 in |
| Weight | 13.3 LB |
