Skip to content Skip to navigation menu
Char-Lynn H Series Low Speed, High Torque (LSHT) Gerotor Spool Motor

101-1035-009

Char-Lynn H Series Low Speed, High Torque (LSHT) Gerotor Spool Motor
Item #100152221
  • Spool Motor
  • Gerotor
  • Spool Valve
  • 7/8-14 UNF SAE O-Ring Port
  • 5.9 Cubic Inch Displacement Per Rev
  • Straight Shaft
+ Show More + Show Less
Char-Lynn H Series Low Speed, High Torque (LSHT) Gerotor Spool Motor
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Spool Motor
  • Gerotor
  • Spool Valve
  • 7/8-14 UNF SAE O-Ring Port
  • 5.9 Cubic Inch Displacement Per Rev

description

  • Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.

applications

  • Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers

features

  • Integrated proven orbit motor principle results in a compact yet powerful package
  • Hydrodynamic journal bearings extend bearing life
  • Three-zone pressure design allows for an increased shaft seal and bearing life
  • Additional configurations available
  • please contact your local Applied® service center for more information

options

  • Low-speed spool
  • Nine shaft options
  • Speed sensors
  • Five mounting styles
Port Location Side Port
Paint/Packaging Low Gloss Black, Individual Box
Motor Element Gerotor
Case Drain Code 0
RPM [Max] 585 rpm
Special Features Assembly Code 0
Mounting Holes 0.535 in
Port Size SAE-10, 7/8-14 UNF
Flow [Max] 15 gal/min
Bolt Circle Dia. 4.19 in
Series H Series
Output Shaft Code 01
Shaft Type Straight w/ Woodruff Key
Rotation Standard Rotation
Special Features Hardware Code 00
Corrosion Resistant No
Splines 0
Paint Code J
Port Size & Location SAE-10 Side
Shaft Size & Type 1 in x 1/4 in Straight
Duty Standard-Duty
Displacement (in³/rev) 5.9
Pilot Diameter 3.25 in
Output Torque at Rated PSI (inch/pounds) 1368 in lb
Seal Material Buna-N
Motor Type Spool Valve
Mounting Type Code A
Material Cast Iron
Flange Orientation Standard
Flow Rate 15 gal/min
RPM [Min] 585 rpm
Mounting Hole Size 0.535 in
Inlet Pressure [Max] 2500 psi
Maximum Speed @ Continuous Flow 585 rpm @ 15 gal/min
Port Code A
Mount Type 2 Bolt, SAE-A
Pressure [Max] 1800 psi
Case Drain None
Port Type SAE O-Ring
Weight 12.25 LB
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison