Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Size & Type | 1 in - 6T Spline |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Output Shaft Code | 02 |
| Bolt Circle Dia. | 4.19 in |
| Series | H Series |
| Pressure [Max] | 1250 psi |
| Port Type | NPTF |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Paint Code | A |
| Pilot Diameter | 3.25 in |
| RPM [Max] | 152 rpm |
| Shaft Type | Splined |
| Special Features Hardware Code | 00 |
| Mount Type | 2 Bolt |
| Port Size | 1/2, 1/2-14 |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 194.72 in lb |
| Mounting Type Code | A |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Case Drain | None |
| Special Features | None |
| Mounting Hole Size | 0.535 in |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 22.6 |
| Splines | 6 |
| Port Code | B |
| Flow [Max] | 15 gal/min |
| Flow Rate | 15 gal/min |
| Duty | Standard-Duty |
| Mounting Holes | 0.535 in |
| Port Size & Location | 1/2 in NPTF Side |
| Port Location | Side Port |
| Motor Element | Gerotor |
| RPM [Min] | 152 rpm |
| Case Drain Code | 0 |
| Material | Cast Iron |
| Weight | 14.7 LB |
