- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Seal Material | Buna-N |
| Port Location | Side Port |
| Flow Rate | 15 gal/min |
| Shaft Size & Type | 1 in - 6T Spline |
| Series | H Series |
| Pressure [Max] | 1250 psi |
| Port Code | A |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 6 |
| Mount Type | 2 Bolt |
| Case Drain | None |
| Shaft Type | Splined |
| Motor Element | Gerotor |
| Port Type | SAE O-Ring |
| Output Shaft Code | 02 |
| Bolt Circle Dia. | 4.19 in |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| Port Size | SAE-10, 7/8-14 UNF |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Special Features Assembly Code | 0 |
| Material | Cast Iron |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | A |
| Displacement (in³/rev) | 22.6 |
| Port Size & Location | SAE-10 Side |
| Case Drain Code | 0 |
| Special Features Hardware Code | 00 |
| Paint Code | A |
| Special Features | None |
| RPM [Max] | 152 rpm |
| Flange Orientation | Standard |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Corrosion Resistant | No |
| Weight | 14.7 LB |

