Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Code | B |
| Displacement (in³/rev) | 2.8 |
| Special Features Assembly Code | 0 |
| Case Drain | None |
| Motor Type | Spool Valve |
| Shaft Type | Straight w/ Woodruff Key |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.535 in |
| Corrosion Resistant | No |
| Flow [Max] | 12 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Seal Material | Buna-N |
| Port Size & Location | 1/2 in NPTF Side |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Rotation | Standard Rotation |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.19 in |
| Paint Code | A |
| Splines | 0 |
| Series | H Series |
| Mount Type | 2 Bolt |
| Port Size | 1/2, 1/2-14 |
| Geroter/Geroler Options | Free Running |
| Duty | Standard-Duty |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | A |
| Port Location | Side Port |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain Code | 0 |
| Special Features | Free Running Gerotor |
| Port Type | NPTF |
| RPM [Max] | 969 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | AA |
| Mounting Holes | 0.535 in |
| Flow Rate | 12 gal/min |
| Pressure [Max] | 1800 psi |
| Flange Orientation | Standard |
| Output Shaft Code | 01 |
| Weight | 13.0 LB |
