Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Bolt Circle Dia. | 4.19 in |
| Port Type | NPTF |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Displacement (in³/rev) | 5.9 |
| Special Features | Free Running Gerotor |
| Geroter/Geroler Options | Free Running |
| Pressure [Max] | 1800 psi |
| Port Code | B |
| Port Location | Side Port |
| Case Drain Code | 0 |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Flow [Max] | 15 gal/min |
| Case Drain | None |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Max] | 585 rpm |
| Flange Orientation | Standard |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Corrosion Resistant | No |
| Port Size & Location | 1/2 in NPTF Side |
| RPM [Min] | 585 rpm |
| Splines | 0 |
| Paint Code | A |
| Mounting Hole Size | 0.535 in |
| Shaft Type | Straight w/ Woodruff Key |
| Pilot Diameter | 3.25 in |
| Flow Rate | 15 gal/min |
| Material | Cast Iron |
| Series | H Series |
| Seal Material | Buna-N |
| Mounting Holes | 0.535 in |
| Port Size | 1/2, 1/2-14 |
| Special Features Hardware Code | AA |
| Output Shaft Code | 01 |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Weight | 13.0 LB |
