Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features Hardware Code | AA |
| Port Size & Location | 1/2 in NPTF Side |
| Port Type | NPTF |
| Splines | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Pressure [Max] | 1650 psi |
| Corrosion Resistant | No |
| Port Size | 1/2, 1/2-14 |
| Pilot Diameter | 3.25 in |
| Displacement (in³/rev) | 9.7 |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Port Code | B |
| Rotation | Standard Rotation |
| Mount Type | 2 Bolt |
| Mounting Hole Size | 0.535 in |
| RPM [Max] | 353 rpm |
| Case Drain Code | 0 |
| Flange Orientation | Standard |
| Mounting Type Code | A |
| Seal Material | Buna-N |
| Case Drain | None |
| Output Shaft Code | 01 |
| Geroter/Geroler Options | Free Running |
| Duty | Standard-Duty |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 4.19 in |
| Flow Rate | 15 gal/min |
| Material | Cast Iron |
| Special Features | Free Running Gerotor |
| Port Location | Side Port |
| Paint Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Element | Gerotor |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 0.535 in |
| Weight | 13.0 LB |
