Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- SAE-10 SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Port Size & Location | SAE-10 Side |
| Port Size | SAE-10 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| Port Code | A |
| RPM [Max] | 760 rpm |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Splines | 0 |
| Corrosion Resistant | No |
| Special Features Hardware Code | AA |
| Mount Type | 2 Bolt |
| Case Drain | None |
| Pressure [Max] | 1800 psi |
| Flow Rate | 15 gal/min |
| RPM [Min] | 760 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Port Location | Side Port |
| Series | H Series |
| Duty | Standard-Duty |
| Special Features | Free Running Gerotor |
| Bolt Circle Dia. | 4.19 in |
| Flange Orientation | Standard |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Displacement (in³/rev) | 4.5 |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Port Type | SAE O-Ring |
| Special Features Assembly Code | 0 |
| Output Shaft Code | 01 |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Case Drain Code | 0 |
| Paint Code | A |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| Weight | 13.0 LB |
