Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Bolt Circle Dia. | 3 1/4 in |
| RPM [Min] | 760 rpm |
| Splines | 0 |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Max] | 760 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Port Location | Side Port |
| Motor Type | Spool Valve |
| Port Code | B |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Mounting Holes | 3/8-16 |
| Mounting Type Code | B |
| Shaft Size & Type | Straight |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Displacement (in³/rev) | 4.5 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 15 gal/min |
| Rotation | Standard Rotation |
| Paint Code | A |
| Mounting Hole Size | 3/8 in |
| Special Features Assembly Code | 0 |
| Port Size | 1/2, 1/2-14 |
| Special Features | None |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 1.75 in |
| Series | H Series |
| Case Drain | None |
| Port Type | NPTF |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Mount Type | 4 Bolt |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Flange Orientation | Standard |
| Shaft Type | Straight w/ Cross Hole |
| Output Shaft Code | 08 |
| Weight | 11.5 LB |
