Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features Assembly Code | 0 |
| Flow Rate | 14 gal/min |
| Special Features Hardware Code | AB |
| Series | H Series |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Port Code | B |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Motor Type | Spool Valve |
| RPM [Min] | 152 rpm |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| RPM [Max] | 152 rpm |
| Pressure [Min] | 600 psi |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Seal Material | Buna-N |
| Corrosion Resistant | No |
| Special Features | Low Speed Valve |
| Mounting Type Code | A |
| Port Size | 1/2, 1/2-14 |
| Paint Code | A |
| Shaft Type | Straight w/ Woodruff Key |
| Pilot Diameter | 3.25 in |
| Bolt Circle Dia. | 4.187 in |
| Case Drain | None |
| Pressure [Max] | 1250 psi |
| Displacement (in³/rev) | 22.58 |
| Mounting Hole Size | 0.565 in |
| Port Size & Location | 1/2 in NPTF Side |
| Duty | Standard-Duty |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Material | Cast Iron |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Mount Type | 2 Bolt |
| Output Shaft Code | 01 |
| Port Type | NPTF |
| Mounting Holes | 0.535 in |
| Case Drain Code | 0 |
| Weight | 15.2 LB |
