Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Type | Straight |
| Mounting Type Code | A |
| Output Shaft Code | 24 |
| Splines | 0 |
| Series | H Series |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Shaft Size & Type | Straight |
| Paint Code | A |
| Mounting Holes | 0.535 in |
| Flow [Max] | 15 gal/min |
| Seal Material | Buna-N |
| Port Size | 1/2, G 1/2 |
| Corrosion Resistant | No |
| Port Code | E |
| Displacement (in³/rev) | 5.86 |
| Pilot Diameter | 3.25 in |
| Case Drain Code | 2 |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 4.187 in |
| Duty | Standard-Duty |
| Flange Orientation | Standard |
| Special Features Hardware Code | 00 |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Flow Rate | 14 gal/min |
| RPM [Min] | 585 rpm |
| Mount Type | 2 Bolt |
| RPM [Max] | 585 rpm |
| Pressure [Max] | 1800 psi |
| Port Type | BSPP |
| Special Features Assembly Code | 0 |
| Material | Cast Iron |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Special Features | None |
| Mounting Hole Size | 0.565 in |
| Weight | 13.0 LB |
