Find a Service Center
- H Series
- 2-Bolt Flange
- 1 in Straight Shaft w/Woodruff Key
- 1/2 NPTF Side Port
- Nitrile Seals
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Duty | Standard-Duty |
| Port Size | 1/2 |
| Pilot Diameter | 3.25 in |
| Bolt Circle Dia. | 4.18 in |
| Shaft Type | Straight w/ Woodruff Key |
| Corrosion Resistant | No |
| Displacement (in³/rev) | 3.6 |
| Special Features | None |
| Mount Type | 2 Bolt Flange |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Port Code | B |
| Mounting Holes | 0.535 in |
| Paint Code | A |
| Port Type | NPTF |
| Flange Orientation | Standard |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Case Drain | None |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Motor Element | Gerotor |
| Splines | 0 |
| Mounting Type Code | A |
| Shaft Size & Type | 1 in Straight w/Woodruff Key |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 802 in lb |
| Inlet Pressure [Max] | 2500 psi |
| Series | H Series |
| Weight | 11.95 LB |
