Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Material | Cast Iron |
| Splines | 6 |
| Mount Type | 2 Bolt |
| Port Location | Side Port |
| Shaft Size & Type | 1 in - 6T Spline |
| Shaft Type | Splined |
| Inlet Pressure [Max] | 2500 psi |
| Geroter/Geroler Options | Free Running |
| Mounting Hole Size | 0.565 in |
| RPM [Max] | 1021 rpm |
| Duty | Standard-Duty |
| Special Features | Free Running Gerotor |
| Bolt Circle Dia. | 4.187 in |
| Case Drain Code | 0 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Rotation | Standard Rotation |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Series | H Series |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1800 psi |
| Mounting Type Code | A |
| Flow Rate | 9.5 gal/min |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 2.2 |
| Flow [Max] | 10 gal/min |
| Special Features Assembly Code | 0 |
| Case Drain | None |
| Mounting Holes | 0.535 in |
| Corrosion Resistant | No |
| Port Type | Manifold |
| Seal Material | Buna-N |
| RPM [Min] | 1021 rpm |
| Special Features Hardware Code | AA |
| Motor Type | Spool Valve |
| Output Shaft Code | 02 |
| Flange Orientation | Standard |
| Port Code | C |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Paint Code | A |
| Weight | 11.2 LB |
