Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Code | C |
| Special Features | Free Running Gerotor |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Material | Cast Iron |
| Mounting Hole Size | 3/8 in |
| Special Features Assembly Code | 0 |
| Output Shaft Code | 01 |
| Pilot Diameter | 1.75 in |
| Bolt Circle Dia. | 3 1/4 in |
| Corrosion Resistant | No |
| Series | H Series |
| Case Drain | None |
| Flange Orientation | Standard |
| Port Type | Manifold |
| Port Location | Side Port |
| RPM [Max] | 953 rpm |
| Output Torque at Rated PSI (inch/pounds) | 805.42 in lb |
| Pressure [Max] | 1800 psi |
| Flow Rate | 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Mount Type | 4 Bolt |
| Splines | 0 |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Geroter/Geroler Options | Free Running |
| Mounting Holes | 3/8-16 |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Shaft Type | Straight w/ Woodruff Key |
| Displacement (in³/rev) | 3.5 |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | AA |
| Mounting Type Code | B |
| Paint Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Seal Material | Buna-N |
| Weight | 11.5 LB |
