Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Pressure [Max] | 1800 psi |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Port Code | C |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Mounting Type Code | B |
| Special Features Hardware Code | 00 |
| RPM [Min] | 469 rpm |
| Corrosion Resistant | No |
| RPM [Max] | 469 rpm |
| Material | Cast Iron |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Flow Rate | 15 gal/min |
| Series | H Series |
| Mounting Hole Size | 3/8 in |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain Code | 0 |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Mounting Holes | 3/8-16 |
| Splines | 0 |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain | None |
| Pilot Diameter | 1.75 in |
| Flange Orientation | Standard |
| Shaft Type | Straight w/ Woodruff Key |
| Port Type | Manifold |
| Seal Material | Buna-N |
| Port Location | Side Port |
| Output Shaft Code | 01 |
| Paint Code | A |
| Displacement (in³/rev) | 7.3 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Special Features Assembly Code | 0 |
| Mount Type | 4 Bolt |
| Motor Type | Spool Valve |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Weight | 12.1 LB |
