Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Seal Material | Buna-N |
| Displacement (in³/rev) | 3.5 |
| Flow Rate | 15 gal/min |
| RPM [Max] | 953 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Port Type | Manifold |
| Splines | 0 |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Output Shaft Code | 07 |
| Output Torque at Rated PSI (inch/pounds) | 802 in lb |
| Series | H Series |
| Special Features | Free Running Gerotor |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Special Features Hardware Code | AA |
| Duty | Standard-Duty |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Holes | 3/8-16 |
| Motor Type | Spool Valve |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Material | Cast Iron |
| Mounting Hole Size | 3/8 in |
| Case Drain | None |
| Shaft Type | Straight w/ Cross Hole |
| Paint Code | A |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Mounting Type Code | B |
| Port Code | C |
| Port Location | Side Port |
| Bolt Circle Dia. | 3 1/4 in |
| Shaft Size & Type | Straight |
| Pilot Diameter | 1.75 in |
| Mount Type | 4 Bolt |
| Motor Element | Gerotor |
| RPM [Min] | 953 rpm |
| Pressure [Max] | 1800 psi |
| Special Features Assembly Code | 0 |
| Weight | 11.5 LB |
