Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Pilot Diameter | 3.25 in |
| Shaft Type | Straight w/ Woodruff Key |
| Port Code | B |
| Seal Material | Buna-N |
| Mount Type | 2 Bolt |
| Case Drain | None |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Speed Sensor Options | Digital Speed Pickup (15 Pulse), 127 [5.0] Lead Wire With Packard Weather Pac Shroud Connector (A=Power, B=Signal, C=Common) |
| Displacement (in³/rev) | 22.58 |
| Corrosion Resistant | No |
| Series | H Series |
| Port Size | 1/2, 1/2-14 |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | A |
| Bolt Circle Dia. | 4.187 in |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| RPM [Min] | 152 rpm |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Mounting Hole Size | 0.565 in |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Port Type | NPTF |
| Output Shaft Code | 01 |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Mounting Holes | 0.535 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flow Rate | 14 gal/min |
| Port Location | Side Port |
| Splines | 0 |
| Pressure [Max] | 1250 psi |
| Material | Cast Iron |
| RPM [Max] | 152 rpm |
| Special Features Hardware Code | BZ |
| Special Features | Speed Sensor |
| Paint Code | A |
| Port Size & Location | 1/2 in NPTF Side |
| Weight | 13.0 LB |
