Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.2 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Case Drain | None |
| Flow [Max] | 10 gal/min |
| Port Size | SAE-10, 7/8-14 UNF |
| Material | Cast Iron |
| Paint Code | A |
| Speed Sensor Options | Digital Speed Pickup (15 Pulse), 127 [5.0] Lead Wire With Packard Weather Pac Shroud Connector (A=Power, B=Signal, C=Common) |
| Mounting Holes | 0.535 in |
| Port Size & Location | SAE-10 Side |
| Port Type | SAE O-Ring |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Mount Type | 2 Bolt |
| Port Location | Side Port |
| RPM [Min] | 1021 rpm |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.535 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Max] | 1021 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Port Code | A |
| Special Features | None |
| Splines | 0 |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 2.2 |
| Series | H Series |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 4.19 in |
| Geroter/Geroler Options | Free Running |
| Special Features Hardware Code | CA |
| Mounting Type Code | A |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1800 psi |
| Shaft Type | Straight w/ Woodruff Key |
| Flow Rate | 10 gal/min |
| Output Shaft Code | 01 |
| Case Drain Code | 0 |
| Weight | 11.76 LB |
