- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Mounting Hole Size | 0.535 in |
| Mounting Type Code | REF! |
| Seal Material | Buna-N |
| Paint Code | A |
| Bolt Circle Dia. | 4.19 in |
| Inlet Pressure [Max] | 2500 psi |
| Displacement (in³/rev) | 22.6 |
| Special Features Hardware Code | 00 |
| Port Size | 1/2, 1/2-14 |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| Rotation | Standard Rotation |
| Motor Element | Gerotor |
| Flow Rate | 15 gal/min |
| Port Code | B |
| Special Features Assembly Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 4672 in lb |
| Special Features | None |
| Series | S Series |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in - 6T Spline |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 153 rpm @ 15 gal/min |
| Case Drain | None |
| Corrosion Resistant | No |
| Pressure [Max] | 1300 psi |
| Output Shaft Code | 02 |
| RPM [Max] | 153 rpm |
| Mounting Holes | 0.535 in |
| Shaft Type | Splined |
| Material | Cast Iron |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Port Type | NPTF |
| RPM [Min] | 371 rpm |
| Flow [Max] | 15 gal/min |
| Splines | 6 |
| Weight | 29.0 LB |

