Find a Service Center
Char-Lynn
129-0132-002
Char-Lynn J-2 Series Low Speed, High Torque (LSHT) Geroler® Spool Motor
Item #100155986
- Spool Motor
- Geroler
- Spool Valve
- G 3/8 BSPP Port
- 1.93 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Harvesters, Seeders, Marine bow thrusters, Food processing
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Seal Material | Buna-N |
| Output Torque at Rated PSI (inch/pounds) | 446 in lb |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 3190 psi |
| Splines | 0 |
| Mounting Holes | M6 x 1 |
| Shaft Type | Straight |
| Port Type | BSPP |
| Special Features | None |
| Output Shaft Code | 05 |
| Case Drain | G 1/8 BSP Straight Thread Port |
| Pilot Diameter | 1.239 in |
| Motor Element | Geroler |
| Mount Type | 5 Bolt |
| Case Drain Code | 2 |
| Port Size | 3/8, G 3/8 |
| Special Features Hardware Code | 00 |
| Duty | Standard-Duty |
| Maximum Speed @ Continuous Flow | 650 rpm @ 5.5 gal/min |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Shaft Size & Type | Straight |
| Paint Code | A |
| Displacement (in³/rev) | 1.93 |
| Mounting Type Code | B |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Location | Side Port |
| Bolt Circle Dia. | 1.77 in |
| Port Code | E |
| Material | Cast Iron |
| Series | J Series, J-2 Series |
| Mounting Hole Size | 6 mm |
| RPM [Max] | 650 rpm |
| Flow Rate | 5.25 gal/min |
| Rotation | Standard Rotation |
| Weight | 5.4 LB |
