Find a Service Center
- Spool Motor
- Geroler
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 22.58 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| RPM [Min] | 152 rpm |
| Shaft Size & Type | 0.875 in 13T Splined |
| Motor Type | Spool Valve |
| Port Type | SAE O-Ring |
| Port Location | Side Port |
| RPM [Max] | 152 rpm |
| Special Features Assembly Code | 0 |
| Rotation | Standard Rotation |
| Duty | Standard-Duty |
| Mounting Hole Size | 0.565 in |
| Flow Rate | 57 lpm |
| Motor Element | Geroler |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Case Drain | None |
| Port Code | A |
| Mount Type | 2 Bolt, SAE B |
| Special Features | None |
| Output Torque at Rated PSI (inch/pounds) | 3811 in lb |
| Series | T Series |
| Bolt Circle Dia. | 5 3/4 in |
| Pilot Diameter | 4 in |
| Mounting Type Code | H |
| Paint Code | A |
| Displacement (in³/rev) | 22.58 |
| Output Shaft Code | 16 |
| Material | Ductile Iron |
| Flange Orientation | Standard |
| Special Features Hardware Code | 00 |
| Mounting Holes | 0.565 in |
| Seal Material | Buna-N |
| Shaft Type | Splined |
| Case Drain Code | 0 |
| Paint/Packaging | Low Gloss Black |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Splines | 13 |
| Weight | 15.0 LB |
