Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 6.2 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Duty | Standard-Duty |
| Displacement (in³/rev) | 6.2 |
| Special Features Hardware Code | 00 |
| Mount Type | 2 Bolt |
| Paint Code | 0 |
| Bolt Circle Dia. | 4.19 in |
| Shaft Size & Type | Splined |
| RPM [Max] | 550 rpm |
| Flow Rate | 15 gal/min |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Shaft Type | Splined |
| RPM [Min] | 550 rpm |
| Motor Type | Spool Valve |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 1938.31 in lb |
| Flange Orientation | Standard |
| Mounting Type Code | A |
| Maximum Speed @ Continuous Flow | 550 rpm @ 15 gal/min |
| Material | Ductile Iron |
| Splines | 13 |
| Corrosion Resistant | No |
| Pilot Diameter | 3.25 in |
| Case Drain | None |
| Port Code | C |
| Paint/Packaging | Individual Box |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Port Location | Side Port |
| Special Features | None |
| Port Type | Manifold |
| Case Drain Code | 0 |
| Series | T Series |
| Output Shaft Code | 16 |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.535 in |
| Weight | 15.0 LB |
