Find a Service Center
- T Series Hydraulic Motor
- Standard-Duty
- 2-Bolt Flange w/3 1/4" Pilot x 4.180" BC
- 1" Shaft, Splined
- 4 in3/rev
| Paint Code | A |
| Motor Type | Spool Valve |
| Mount Type | 2 Bolt Flange |
| Seal Material | Buna-N |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| Series | T Series |
| Maximum Speed @ Continuous Flow | 849 rpm @ 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1222 in lb |
| Shaft Size & Type | 1 in SAE-B 6T Splined |
| Port Location | Side Port |
| Motor Element | Geroler |
| Bolt Circle Dia. | 4.18 in |
| Case Drain Code | 0 |
| Shaft Type | Splined |
| Splines | 6 |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Code | A |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| Output Shaft Code | 02 |
| Port Type | SAE O-Ring |
| Case Drain | None |
| Mounting Holes | 0.535 in |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 4 |
| Pilot Diameter | 3.25 in |
| Special Features | Digital Speed Pickup, Increased Housing Leakage |
| Flange Orientation | Standard |
| Port Size | SAE-10 |
| Special Features Hardware Code | FJ |
| Weight | 15.0 LB |
