These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Rating Code
B
Operation
Solenoid Operated
Spool Spring Arrangement Code
A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Indicator Lights
Yes
Spool Code
2
Spool Indicator Switch Code
S5
Electrical Connection
Wired Terminal Block
AC/DC
AC
Function
2-Position Spring Offset, End to End
Rated Flow [Max]
21 gal/min
Port T Pressure Rating
150 psi
Response Type
Standard Response
Pressure [Max]
5075 psi
EN Code
None
Pilot Valve Type
N/A
Solenoid Code
B
Electrical Connector Code
T
Surge Suppressor/Damper
None
Mechanical Options
None
Pressure Port Check Valve Pressure
N/A
Cycle Rate [Max]
N/A
Reducer Module
N/A
Spool Shift Timing
N/A
Port Restrictor Plugs
None
Valve Type
High-Performance
Port T Code
2
Overrides
No Overrides
Actuator Type
Solenoid
Design No.
60
Solenoid Energization Code
None
Center Position
All Ports Blocked
Crossover
All Ports Blocked
Solenoid
Single
Pilot/Drain
None
Port Restrictor Plug Code
None
Housing Code
W
Electrical Options
None
Manual Override Option Code
None
Seal Material
Buna-N
Coil Type Code
F
NFPA Size
D03
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Function Code
2
Surge Suppressor/Damper Code
None
Solenoid Indicator Lights Code
L
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back