These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Design No.
60
Port Restrictor Plugs
None
Overrides
No Overrides
Spool Code
6
Solenoid Energization Code
None
Spool Shift Timing
N/A
Pilot/Drain
None
Rated Flow [Max]
21 gal/min
Electrical Options
None
EN Code
None
Manual Override Option Code
H
Port T Pressure Rating
3000 psi
Seal Material
Buna-N
Port Restrictor Plug Code
None
Cycle Rate [Max]
N/A
Coil Type
DIN 43650
Electrical Connector Code
None
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
Reducer Module
N/A
Solenoid Code
G
Operation
Solenoid Operated
Electrical Connection
DIN 43650
Function Code
6
Voltage & Frequency
12 VDC
Center Position
P Blocked, A & B to T
AC/DC
DC
Response Type
Standard Response
Function
3-Position Detented
Indicator Lights
No
Surge Suppressor/Damper
None
Pilot Valve Type
N/A
Coil Type Code
U
Housing Code
None
Pressure Port Check Valve Pressure
N/A
Mechanical Options
None
Pressure [Max]
5075 psi
Port T Code
7
Crossover
P Blocked, A or B to T
Actuator Type
Solenoid
Solenoid Indicator Lights Code
None
Solenoid
Double
Spool Spring Arrangement Code
N
NFPA Size
D03
Coil Rating Code
G
Valve Type
High-Performance
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
