Find a Service Center
- RV3-10 Series Relief Valve
- Direct Acting
- C-10-2 Cavity
- Buna-N Seals
- Cap Adjustment
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Series | RV3-10 |
| Cracking Pressure [Max] | 3600 psi |
| Adjustment Type | Cap |
| Flow [Max] | 20 gal/min |
| Cracking Pressure [Min] | 600 psi |
| Pressure Setting | 2400 psi |
| Type | Relief Valve |
| Housing Material | Cartridge Only |
| Pressure [Max] | 3600 psi |
| Seal Material | Buna-N |
| Port Size | Cartridge Only |
| Model No. | RV3-10-C-0-36/24 |
| Cavity | C-10-2 |
| Operation | Direct Acting |
| Seal Kit Buna | 565803 |
| Seal Kit Viton | 566086 |
| Manufacturer Part No. | RV3-10-C-0-36/24 |
| Body Type | 10 |
| Cage Seals | Single Backup Ring |
| Weight | 0.48 LB |
