Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered, Double End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Function | 3-Position Spring Centered, Double End |
| Pressure Port Check Valve Pressure | N/A |
| Crossover | All Ports Open, Restricted |
| Port Restrictor Plugs | None |
| No. of Stages | Single Stage |
| Actuator Type | Solenoid |
| Spool Code | 8 |
| Response Type | Standard Response |
| Electrical Connection | KU W/ Deutsch Connector |
| Mounting | Subplate/Manifold Mount |
| Solenoid | Double |
| Leakage | Standard Performance |
| Temperature Range [Min] | 68 °F |
| Port T Pressure Rating | 1000 psi |
| Pilot/Drain | None |
| NFPA Size | D05 |
| Electrical Options | None |
| Rated Flow [Max] | 20 gal/min |
| Cycle Rate [Max] | N/A |
| Mechanical Options | None |
| Electrical Options Code | None |
| Center Position | P to T, A & B Blocked |
| AC/DC | AC |
| Coil Type | Flying Leads |
| Reducer Module | No |
| Valve Type | Standard-Duty |
| Overrides | No Overrides |
| Operation | Solenoid Operated |
| Design No. | 60 |
| Coil Type Code | None |
| Pressure [Max] | 3600 psi |
| Coil Rating Code | G |
| Pilot Valve Type | N/A |
| Surge Suppressor/Damper | None |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Spool Center Condition | A Port and Double Offset sensing switch on B Port |
| Model No. | DG4S4-018C-G-60 |
| Watt Rating | 42 W |
| Body Material | Gray Iron |
| Temperature Range [Max] | 179.6 °F |
| Tank Port Rating | 1000 |
| Spool Spring Arrangement Code | C |
| Fluid Cleanliness | 19/17/14 micron |
| Mechanical Options Code | None |
| Indicator Lights | No |
| Seal Material | Buna-N |
| Flow Direction Code | 4 |
| Weight | 10.0 LB |
