- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Indicator Lights | No |
| Port Restrictor Plugs | None |
| Response Type | Standard Response |
| Surge Suppressor/Damper | None |
| Fluid Cleanliness | 19/17/14 micron |
| Center Position | All Ports Blocked |
| Coil Rating Code | X |
| Manual Override | Plain Override |
| Valve Type | Standard-Duty |
| NFPA Size | D05 |
| Mechanical Options | None |
| Compatible Fluids | Petroleum Oil |
| Function | 3-Position Spring Centered |
| Temperature Range [Min] | 68 °F |
| Mechanical Options Code | None |
| Coil Type | Flying Leads |
| Coil Type Code | None |
| Operation | Solenoid Operated |
| Electrical Options | None |
| Pilot Valve Type | N/A |
| Actuator Type | Solenoid |
| Port T Pressure Rating | 1000 psi |
| Tank Port Rating | 1000 |
| Reducer Module | N/A |
| Electrical Connection | Lead Wires w/o Terminal Box |
| No. of Stages | Single Stage |
| Model No. | DG4S4-012C-X-60 |
| Pilot/Drain | None |
| Spool Spring Arrangement Code | C |
| Crossover | All Ports Blocked |
| Electrical Options Code | None |
| Body Material | Gray Iron |
| Mounting | Subplate/Manifold Mount |
| Voltage & Frequency | 250 VDC |
| Spool Code | 2 |
| AC/DC | DC |
| Overrides | No Overrides |
| Pressure Port Check Valve Pressure | N/A |
| Seal Material | Buna-N |
| Flow Direction Code | 4 |
| Actuation Identification | Solenoid A, Solenoid B |
| Solenoid | Double |
| Design No. | 60 |
| Pressure [Max] | 4500 psi |
| Performance | Standard Performance |
| Rated Flow [Max] | 24 gal/min |
| Leakage | Standard Performance |
| Temperature Range [Max] | 122 °F |
| Cycle Rate [Max] | N/A |
| Weight | 10.0 LB |

