02-119874

Vickers D05 Solenoid Valve

Item #101955179

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Electrical Connection	KU W/ Deutsch Connector
Valve Type	Standard-Duty
Surge Suppressor/Damper	None
Mechanical Options Code	None
NFPA Size	D05
Coil Type Code	None
Pressure Port Check Valve Pressure	N/A
Port Restrictor Plugs	None
Port T Pressure Rating	1000 psi
Operation	Solenoid Operated
Crossover	All Ports Blocked, or P & B Blocked, A to T
Electrical Options	None
Rated Flow [Max]	25 gal/min
Solenoid	Double
Coil Type	Flying Leads
Reducer Module	N/A
Electrical Options Code	None
Pressure [Max]	3600 psi
Spool Spring Arrangement Code	C
Coil Rating Code	D
Seal Material	Buna-N
Spool Code	3
Indicator Lights	No
Flow Direction Code	4
Voltage & Frequency	220 VAC - 50 Hz
Mechanical Options	None
Pilot/Drain	None
AC/DC	AC
Pilot Valve Type	N/A
Actuator Type	Solenoid
Overrides	No Overrides
Tank Port Rating	1000
Response Type	Standard Response
Center Position	P & B Blocked, A to T
Function	3-Position Spring Centered, Double End
Model No.	DG4S4-013C-D-60
Cycle Rate [Max]	N/A
Design No.	60
Weight	10.0 LB