Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Valve Type | Standard-Duty |
| Port Restrictor Plugs | None |
| Port T Pressure Rating | 1000 psi |
| Tank Port Rating | 1000 |
| Model No. | DG4S4W-012A-G-60 |
| Indicator Lights | No |
| Response Type | Standard Response |
| Center Position | All Ports Blocked |
| Seal Material | Buna-N |
| Cycle Rate [Max] | N/A |
| Flow Direction Code | 4 |
| Electrical Connection | KU W/ Deutsch Connector |
| Spool Code | 2 |
| Solenoid | Single |
| Operation | Solenoid Operated |
| Overrides | No Overrides |
| Pilot Valve Type | N/A |
| Electrical Options Code | W |
| NFPA Size | D05 |
| Coil Type Code | None |
| Pressure [Max] | 3600 psi |
| Rated Flow [Max] | 25 gal/min |
| Function | 2-Position Spring Offset |
| Surge Suppressor/Damper | None |
| Coil Rating Code | G |
| Reducer Module | N/A |
| Actuator Type | Solenoid |
| Voltage & Frequency | 12 VDC |
| Electrical Options | None |
| Mechanical Options | None |
| Crossover | All Ports Blocked |
| Spool Spring Arrangement Code | A |
| Pressure Port Check Valve Pressure | N/A |
| Coil Type | Flying Leads |
| Mechanical Options Code | None |
| Pilot/Drain | None |
| Design No. | 60 |
| AC/DC | DC |
| Weight | 10.0 LB |
