- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered, Double End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Seal Material | Buna-N |
| Overrides | No Overrides |
| Valve Type | Standard-Duty |
| Coil Type Code | None |
| Mechanical Options Code | None |
| Electrical Connection | KU W/ Deutsch Connector |
| Reducer Module | N/A |
| Response Type | Standard Response |
| Design No. | 60 |
| Flow Direction Code | 4 |
| Pressure [Max] | 3600 psi |
| AC/DC | AC |
| Mechanical Options | None |
| Spool Code | 2 |
| Cycle Rate [Max] | N/A |
| Operation | Solenoid Operated |
| Port T Pressure Rating | 1000 psi |
| Crossover | All Ports Blocked |
| Solenoid | Double |
| Port Restrictor Plugs | None |
| Electrical Options Code | W |
| Function | 3-Position Spring Centered, Double End |
| NFPA Size | D05 |
| Model No. | DG4S4W-012C-D-60 |
| Center Position | All Ports Blocked |
| Rated Flow [Max] | 25 gal/min |
| Surge Suppressor/Damper | None |
| Actuator Type | Solenoid |
| Pilot Valve Type | N/A |
| Spool Spring Arrangement Code | C |
| Electrical Options | None |
| Pilot/Drain | None |
| Coil Type | Flying Leads |
| Indicator Lights | No |
| Pressure Port Check Valve Pressure | N/A |
| Tank Port Rating | 1000 |
| Voltage & Frequency | 220 VAC - 50 Hz |
| Coil Rating Code | D |
| Weight | 10.0 LB |

