These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Manual Override Option Code
Z
Port Restrictor Plugs
None
Surge Suppressor/Damper Code
None
Overrides
No Overrides
Coil Type Code
U
Solenoid Energization Code
None
Mechanical Options
None
EN Code
None
Indicator Lights
No
Pressure [Max]
5075 psi
Solenoid
Double
Electrical Connection
DIN 43650
Solenoid Indicator Lights Code
None
Valve Type
High-Performance
Actuator Type
Solenoid
Port T Code
7
Surge Suppressor/Damper
None
AC/DC
DC
Cycle Rate [Max]
N/A
Pilot Valve Type
N/A
Spool Spring Arrangement Code
N
Spool Indicator Switch Code
None
Pressure Port Check Valve Pressure
N/A
Spool Code
2
Coil Type
DIN 43650
Design No.
60
Center Position
All Ports Blocked
NFPA Size
D03
Coil Rating Code
H
Function Code
2
Spool Shift Timing
N/A
Voltage & Frequency
24 VDC
Reducer Module
N/A
Operation
Solenoid Operated
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Port Restrictor Plug Code
None
Solenoid Code
H
Electrical Connector Code
None
Crossover
All Ports Blocked
Housing Code
None
Pilot/Drain
None
Electrical Options
None
Seal Material
Buna-N
Function
3-Position Detented
Port T Pressure Rating
3000 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
